

For 2WD short course trucks on 2s LiPo and geared conservatively.
1/10th 2WD Stadium trucks and buggies on 2s for bashing and limited runs on 3s with conservative gearing.
Great for 1/10th scale on-road cars for 2s and 3s use.
NOT for use in 4WD short course trucks.
1/10th 2WD Stadium trucks and buggies on 2s for bashing and limited runs on 3s with conservative gearing.
Great for 1/10th scale on-road cars for 2s and 3s use.
NOT for use in 4WD short course trucks.
Input Voltage (V) min. - max.: | 2S-3S LiPo, 6-8 NiMH |
Motor RPM/V = KV: | 4600 |
Motor Type: | 540 Type Brushless Sensorless 4-pole Electric Inrunner Motor |
Length (mm): | 50mm |
Diameter ø (mm): | 36mm |
Shaft ø (mm): | 3.175mm |
Shaft Length (mm): | 15mm |
Motor Rear bearing size: | 5x14x5 mm |
Motor Front bearing size: | 5x14x5 mm |
Max. Recommended Vehicle Weight: | 2300g with battery, ready-to-run |
Connector(s) Type: | 4mm male bullet |
Recommended ESC(s): | Mamba Max Pro, Sidewinder 3 |
Motor weight: | 196.0g (with wires) |
Mounting Hole Specifications: | 3mm screw holes |